ANGLED DOUBLE DIGGER™
SHALLOW SOCKET TOOL
If you thought the single Angle
Support Plate was awesome, how
about putting TWO studs together.
The Woody’s exclusive 7° angle
design and the double digger plate
design that originated at Woody’s
is another example of Woody’s
innovative developments. Available
in aluminum 5/16" and 7mm
ADA-3725 -- 7mm
ADA2-3775 -- 5/16"
Woody’s developed a unique
shallow socket for installing
studs that provides the
torque to tighten without
touching the surface of
the support plate. Works
ideal with colored support
plates. The 5/16" socket is
deep enough to install studs
up to 1.575" length.
SCW-4500 -- 7mm
SCW-4505 -- 5/16"
COLORED ROUND SUPPORT PLATES
Stand out from the crowd with Woody’s
colored Round Support Plates.
Woody’s introduced the 5/16"
round aluminum support plate
with a 1 3/8" diameter last
year. Woody’s now offers the
5/16" aluminum round support
plate in all the colors needed to
make your sled unique.
Woody’s complete line of powder
coated colored support plates are
red, green, yellow, blue and orange.
Purple is anodized. Available in quantities of 48.
|The studding experts at Woody’s have designed a
template that includes the Trail Template-2, Double
Digger™ and the Performance Template patterns on
ONE TEMPLATE. The Woody’s® Universal Template will have patterns from 48 to 192 studs with exception
of the 72 stud pattern. One template gives you the ability to add to your stud pattern without waiting for a
different template. Constructed from heavy card stock with a laminate protective cover that will fit
15" wide track configurations. Universal Template exclusively from Woody’s.
For those that will use the template a number of
times, it is also available in a clear polycarbonate.
STAINLESS STEEL TRACTION MASTER®
WITH STAINLESS STEEL NUTS
How do you make a better stainless
You make it a Traction Master®!
Now available only from Woody’s a
stainless steel stud with the patented
Traction Master® head. You get all the
benefits of the Gold Digger® Traction Master®
track trapping principle for the snowmobiler
that desires stainless steel. To make
this package complete you will receive
non-corrosive stainless steel nuts.
Available in 5/16" in lengths from 1" to 1.325".
Patented, US No. 5,234,266 and Canadian No. 2,086,186
Where’s the beef? Woody’s® 5/16" push
through Chisel Tooth™ stud delivers it.
Consistent hook-up with reliability to
spare is the result of the patented Traction
Master® Chisel with an 1” head and 5/16"
shaft. Team it up with the new Double
Digger™ Angle Support Plate and your
traction concerns are history.
Available in 1.075" and 1.200".
Patented, US No. 5,234,266 and
Canadian No. 2,086,186
Go to More New Products >>